PL | EN
Rozmiar warki
-
12 LOczekiwana ilość gotowego piwa
-
60 minCzas gotowania
-
7 %/hSzybkość odparowywania
-
14.8 LIlość gotowanej brzeczki
-
5 %Straty z gotowania
-
14.5Gęstość przed gotowaniem BLG
-
5 %Straty z fermentacji
-
5 %Straty z chmielenia na zimno
Zacieranie
-
75 %Wydajność zacierania
-
3 L / kgStosunek wody do ziarna
-
9.6 LIlość wody do zacierania
-
12.8 LCałkowita objętość zacieru
Kroki
Temp | Czas |
---|---|
66 C | 60 min |
-
StatusUwarzono
-
ZAKOŃCZONE
-
LEFFE CLONE #2
tomitomi13 dodano 2013 dni temu
Wprowadziliśmy nowe konto Standard. Sprawdź aktualne plany subskrypcji.
Czy wiesz, że użytkownicy PRO mogą dodawać prywatne receptury oraz warki? Zostań PRO!
Surowce fermentujące
Typ | Nazwa | Ilość | Ekstrakcja | EBC |
---|---|---|---|---|
Ziarno | Pilzneński | 2.2 kg 62% | 81 % | 4 |
Ziarno | Strzegom Wiedeński | 1 kg 28.2% | 79 % | 10 |
Cukier | Cukier kandyzowany belgijski biały | 0.35 kg 9.9% | --- % | --- |
Suma | 3.55 kg |
Chmiele
Balans goryczy 0.4 Zbalansowane
Użyto do | Nazwa | Ilość | Czas | Alfa kwasy |
---|---|---|---|---|
Gotowanie | Columbus/Tomahawk/Zeus | 5 g | 60 min | 14.3 % |
Gotowanie | Styrian Golding | 30 g | 60 min | 2.8 % |
Drożdze
Nazwa | Typ | Forma | Ilość | Laboratorium |
---|---|---|---|---|
Wyeast - Belgian Ardennes | Ale | Gęstwa | 90 ml | Wyeast Labs |
Zadano w 20*C, gęstwa 8 dniowa |
Notatki
-
https://byo.com/article/belgian-blond-style-profile/
19 mar 2019, 13:09 -
Belgian Pilsner malt is the natural choice for the base malt. Feel free to substitute any high quality malt of a similar flavor and color from a different supplier. The sugar I use is the cheapest table sugar I can find at my warehouse store. Mill the grains and dough-in targeting a mash of around 1.5 quarts of water to 1 pound of grain (a liquor-to-grist ratio of about 3:1 by weight) and a temperature of 150 °F (66 °C). Hold the mash at 150 °F (66 °C) until enzymatic conversion is complete. Infuse the mash with near-boiling water while stirring or with a recirculating mash system raise the temperature to mash out at 168 °F (76 °C). Sparge slowly with 170 °F (77 °C) water, collecting wort until the pre-boil kettle volume is around 6.5 gallons (24.4 L) and the gravity is 1.050 (12.4 °P).
The total wort boil time is 90 minutes, which helps reduce the S-Methyl methionine (SMM) present in the lightly kilned Pilsner malt and results in less Dimethyl Sulfide (DMS) in the finished beer. Add the bittering hops with 60 minutes remaining in the boil. Add the sugar with 15 minutes left in the boil. Chill the wort rapidly to 64 °F (18 °C), let the break material settle, rack to the fermenter, pitch the yeast and aerate thoroughly.
You will need 2 packages of liquid yeast or you can make a 2.5L starter from 1 package. Pitch yeast at 64 °F (18 °C), aerate or oxygenate, and let the temperature rise slowly to 68 °F (20 °C) over the course of several days. Ferment until the yeast drops clear. With healthy yeast, fermentation should be complete in a week, but do not rush it. It is important for the beer to attenuate fully. Rack to a keg and force carbonate or rack to a bottling bucket, add priming sugar, and bottle. When finished, carbonate the beer to approximately 3 volumes.
25 mar 2019, 09:53